Measurement and inspection are different jobs.
Dimensional measurement
Non-contact measurement of the strip itself: width, thermal profile, centerline deviation, crop shape and mult width on slitting lines. Five SKUs by mill type, feeding L1 and L2 in real time so the line can correct itself.
Explore Eagle Eye ›Surface quality inspection
Defect detection rather than dimension: edge cracks and pinholes found on the run, so faulty coil is caught at the mill instead of at the customer. Shares the cold mill camera hardware with Eagle Eye.
Explore Hawk Eye ›If you are measuring a dimension, it is Eagle Eye. If you are looking for a defect, it is Hawk Eye.
Stereoscopic width measurement on hot mills, cold mills and slitting lines.
Thermal gradient imaging across the strip on the hot end.
Interstand centerline deviation, camber and cobble detection, crop optimisation and shear control.
Edge crack detection on the run, before the coil moves downstream.
Pinhole detection across the full strip width on processing lines.
Common water-cooled GigE camera hardware and L1 or L2 integration over OPC UA, Modbus TCP or EtherNet/IP.
Individual systems and add-on modules.
Eagle Eye add-on
Camber, centerline and cobble monitoring between stands.
View system ›Eagle Eye add-on
Crop shape measurement feeding shear control.
View system ›Tell us the line and what you need to see. A GGC engineer in Dayton will tell you which platform fits, and whether you need both.